Can a Car AC Recharge Kit Be Used For Commercial Vehicles?

Car AC Recharge Kit Be Used For Commercial Vehicles

A car ac recharge kit allows you to add refrigerant to your vehicle’s air conditioning system. It can also seal leaks that may be present in the system. If your vehicle is low on refrigerant, you will notice that the air doesn’t feel as cool. If your air conditioning system has a major leak, you should have the system professionally repaired before trying a DIY recharge kit.

Many off-the-shelf manual AC recharge kits use a stop leak sealer that plugs small leaks as the refrigerant runs through the system. This can quickly clog the components in your air conditioner like the hoses and compressor. The chemicals in this type of sealer can also damage the delicate compressor components.

In addition, recharge kits typically have simplified pressure gauges that don’t guarantee the correct pressure reading. This makes it easy to overfill the system with refrigerant. This can lead to expensive repair bills in the future.

Most off-the-shelf recharge kits are filled with R-134a refrigerant. However, hybrid and electric cars, such as the Volkswagen eGolf, have a different A/C compressor design that requires a new type of refrigerant and compressor oil. It is important to only use the right kind of refrigerant in your vehicle’s A/C system.

Can a Car AC Recharge Kit Be Used For Commercial Vehicles?

When buying an car ac recharge kit, look for a high-quality brand that will include all the necessary tools for the job. The kit should include a canister of refrigerant, a hose, a coupler, and a pressure gauge. Using a high-quality recharge kit will ensure that you are using the correct refrigerant and not contaminating your system with other contaminants.

Start by finding your vehicle’s air conditioning compressor’s low side port, which can vary by make and model. This port is located on the compressor, and looks like a tube with a large end. Attach the hose to this port, and connect it to your recharge canister. Then, turn on the air conditioner and let it run until the pressure is at or near 45 psi. After that, turn off the air conditioner and let the hose cool off.

It is important to know that a recharge kit will only fill your car’s air conditioner up to the recommended pressure, so you should always check the pressure on the gauge before adding more refrigerant. You should also check the system for any signs of a leak before adding more refrigerant, such as an odor or a spongy feel. If you do suspect a leak, you should purchase a UV light and some UV dye to find the source of the leak. Once the leak is found, you should have it repaired by a professional technician to avoid further damage to your compressor and other A/C components. Whether you need an auto A/C recharge or want to protect your AC system from leaks, shop at AutoZone for the best products and advice.

Leave a Reply

Your email address will not be published. Required fields are marked *